Faux Leather Sheets

Gallery


SPECS

DESCRIPTION GENERAL INFORMATION
Stock our Faux Leather Sheets and customize on your own! With choices between Black/Silver, Chocolate/Black, Chestnut/Black & Sandstone/Black with both low melt & pressure sensitive backing. Personalization at your fingertips!

SHEET SIZES
24"x12"

LEATHER COLORS
• Black/Silver
• Chestnut/Black
• Chocolate/Black
• Sandstone/Black

BACKINGS
Low Melt - This backing us commonly used on wearables and applied with a heat press.
Pressure Sensitive - This sticker backing is commonly used on hard goods & self applied with hand pressure. 

LIMITATIONS
Low Melt: Since the product is applied with heat, it is not recommended for use on materials that may be heat sensitive (ex. some nylons, silk, some plastics, leather wool, fleece, etc.)
Pressure Sensitive: The use on surfaces that may contain an oil finish, such as silicon, Teflon, rough fabrics, or outdoor goods is not recommended. 

WASHING INFORMATION
Faux Leather will withstand at least 52 domestic washing machine cycles at 104° F max.

SHELF LIFE
One year shelf life before applying (room temperature controlled environment).

APPLICATION INSTRUCTIONS

Our Faux Leather Sheets are meant to be used for etching/engraving process to obtain Faux Leather Patches. If material is manipulated in anyway, application settings may be affected.

PRESSURE-SENSITIVE
Make sure the application area is thoroughly cleaned. We recommend the use of rubbing alcohol. Remove paper backing and press firmly on the desired location.

LOW MELT HEAT SEAL ON GARMENTS - TOP HEAT

  1. Set the press at 315-325° F with 70-80 psi of pressure.
  2. Place the garment in the press. Make sure that the application location is wrinkle-free.
  3. Place the patch onto the desired location on the garment. Thermal tape is optional.
  4. Place a FlexStyle® silicone pad over the design.
  5. Press for 12-18 seconds
  6. Remove the garment from the press and allow to cool.

LOW MELT HEAT SEAL ON HATS - USING THE IQ 360 HAT HEAT PRESS

  1. Set the press at 245°-255° F for top heat and 315°- 320°F for bottom heat with 60-80 psi of pressure.
  2. Place the hat on the heat press, leaving out the inner layer of the cap. Use the adjustment lever for a better grip.
  3.  Place the patch on the desired location. To secure the patch and preventing it from moving, use Thermal Tape.
  4. Place a FlexStyle® silicone pad over the design.
  5. Press for 10-15 seconds.
  6. Deactivate the adjustment lever and remove the hat from the heat press.
  7. Remove the Thermal Tape once the patch has cooled.

DISCLAIMER: World Emblem recommends testing the best combination of heat seal parameters before application. World Emblem is not liable for any damages to garments during the application process.

NOTE: Please check out youtube.com/worldemblem for step by step instructions for applying our apparel decorations.

Additional Information & Benefits

World Emblem also offers a Perfect Print® Sublimation System, allowing you the ability to manufacture your own emblems. Through a secure online catalog, you can produce emblems on-demand and at a fraction of the cost of outsourcing the production. The Perfect Print® Sublimation System includes a printer, software, templates, paper, ink and blanks.

NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.

For technical & application information please visit www.worldemblem.com/technical

Need Some Help?

From product selection to pricing to design file preparation, our team of support personnel is ready to assist you. Whether you’re ordering a few or 10,000, we are here to help.