Custom size embroidered emblem with a 3D effect on certain parts of the design, cut with adhesive backing to apply on surfaces through heat or pressure.
Embroidered applique with 3D effect using EVA foam inside the emblem. Variable in size and shape, manufactured with 100% polyester fabrics and threads, finished with an embroidered border and adhesive in the back.
EMBLEM SIZE LIMITS
Height and Width: Max - 18”, Min - 1” (+/-1mm)
Embroidery: The design cannot have more than 15 different colors of thread.
•Low Melt Heat Seal
•Industrial Heat Seal
Heat Seal: Since the product is applied with heat, it is not recommended for use on materials that may be heat sensitive (ex. some nylons, silk some plastics, leather, wool, fleece, etc.).
Pressure-Sensitive: The use of these emblems on surfaces that may contain an oil finish, such as silicon, Teflon™, rough fabrics, or outdoor goods is not recommended.
A digital sample via email is available in 24 hours. Edits are allowed.
Samples time 2 days plus shipping. Production time 5 days plus shipping (additional day per 500 pieces).
MINIMUM SIZE TEXTS
For flat embroidered text cannot have a height smaller than 4mm and column width of 1mm.
The 3D raised part of the emblem cannot be wider than 9mm or thinner than 3mm.
Machine wash inside-out using mild detergent. Patches with industrial heat seal backing will withstand 52 industrial wash cycles.
One year shelf life before applying (room temperature controlled environment).
Make sure the application area is thoroughly cleaned. We recommend the use of rubbing alcohol. Remove paper backing and press firmly on the desired location.
LOW MELT HEAT SEAL ON GARMENTS - TOP HEAT
LOW MELT HEAT SEAL ON HATS - USING THE IQ 360 HAT HEAT PRESS
DISCLAIMER: World Emblem recommends testing the best combination of heat seal parameters before application. World Emblem is not liable for any damages to garments during the application process.
NOTE: Please check out youtube.com/worldemblem for step by step instructions for applying our apparel decorations.
3D embroidered patches can be heat sealed onto garments or applied to flat, non-textured surfaces with a pressure-sensitive backing. This simple addition can help your brand stand out from your competitors.
3D embroidered patches come in metallic and non-metallic colors. Because of the flexibility of this product, both in its design and production, the possibilities are endless. To ensure the best application experience, remember to use our custom heat seal pad to apply the emblems.
NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.
For technical & application information please visit www.worldemblem.com/technical
From product selection to pricing to design file preparation, our team of support personnel is ready to assist you. Whether you’re ordering a few or 10,000, we are here to help.