Leather Patches

Gallery


SPECS - GENUINE LEATHER

DESCRIPTION
Designs are laser etched into the leather to enhance your hats, bags, and jackets. In this process the leather is burned with the laser and gets permanently engraved. As with genuine leather products, shades of leather can vary.

EMBLEM SIZE LIMITS
Min: 0.5” X 0.5” / Max: 6” X 6” (+/-1mm)
Due to the laser cutting process, patch size may vary by +/- 5%
Approximately 1.5mm thick (may vary).

LEATHER COLOR
3 Leather colors available: Caramel, Taupe & Natural.

MINIMUM TEXT SIZE
Smallest character should be at least 1mm high.

MINIMUM ELEMENTS SIZE
Elements on leather emblems must be at least 0.3mm width.

OUTLINE
Outlines should be 3mm width.

BACKING
• Low Melt Heat Seal
• Pressure Sensitive

ELECTRONIC PROOF
A digital sample via email is available in 48 hours. Edits are allowed.

PRODUCTION TIME
Samples time: 48 hours plus shipping.
Production time: 24 hrs. *
*Excludes Shipping. Some restrictions may apply.
Call 1-800-766-0448 for more information.

WASHING INFORMATION
This product is intended to be used on hats, bags and jackets not regularly washed. Not recommended for dry cleaning or industrial wash.

SHELF LIFE
One year shelf life before applying (room temperature controlled environment).

 

Our Genuine Leather Patches are a natural product, truly authentic. Variations in color are not to be considered a fault but inherent of the natural beauty and uniqueness of the leather. Every piece is different, therefore irregularities in the consistency and depth of the color are expected. Also, due to the nature of leather (it’s colors and textures), digital simulation might vary from the actual physical sample. We at World Emblem strive for your satisfaction and will do our very best to maintain uniformity of all patches.

APPLICATION INSTRUCTIONS - GENUINE LEATHER

PRESSURE-SENSITIVE
Make sure the application area is thoroughly cleaned. We recommend the use of rubbing alcohol. Remove paper backing and press firmly on the desired location.

LOW MELT HEAT SEAL ON GARMENTS - TOP HEAT

  1. Set the press at 315-325° F with 70-80 psi of pressure.
  2. Place the garment in the press. Make sure that the application location is wrinkle-free.
  3. Place the patch onto the desired location on the garment. Thermal tape is optional.
  4. Place a FlexStyle® silicone pad over the design.
  5. Press for 12-18 seconds
  6. Remove the garment from the press and allow to cool.

LOW MELT HEAT SEAL ON HATS - USING THE IQ 360 HAT HEAT PRESS

  1. Set the press at 275°-285° F for top heat and 315°- 320°F for bottom heat with 60-80 psi of pressure.
  2. Place the hat on the heat press, leaving out the inner layer of the cap. Use the adjustment lever for a better grip.
  3. Place the patch on the desired location. To secure the patch and preventing it from moving, use Thermal Tape.
  4. Place a FlexStyle® silicone pad over the design.
  5. Press for 15-18 seconds.
  6. Deactivate the adjustment lever and remove the hat from the heat press.
  7. Remove the Thermal Tape once the patch has cooled.

LIMITATIONS
Low Melt: Since the product is applied with heat, it is not recommended for use on materials that may be heat sensitive (ex. some nylons, silk some plastics, leather, wool, fleece, etc.). The product is intended to be used on hats, bags and jackets that are not intended for regular home washing.
Pressure-Sensitive: The use of these emblems on surfaces that may contain an oil finish, such as silicon, Teflon™, rough fabrics, or outdoor goods is not recommended.

DISCLAIMER: World Emblem recommends testing the best combination of heat seal parameters before application. World Emblem is not liable for any damages to garments during the application process.

NOTE: Please check out youtube.com/worldemblem for step by step instructions for applying our apparel decorations.

PRICES

SPECS - FAUX LEATHER (VEGAN)

DESCRIPTION
Our Faux Leather Patches provide the look and feel of real leather with a consistent, even finish. Available in multiple color choices, our patches are laser engraved providing a rustic but upscale look for your brand. And best of all, our Faux Leather is easy to maintain and safe for domestic wash!

EMBLEM SIZE LIMITS
Min: 0.5” X 0.5” / Max: 6” X 6”
Due to the laser cutting process, patch size may vary by +/- 5%
Approximately 1.5mm thick (may vary).

LEATHER COLOR
• Black/Silver
• Chestnut/Black
• Chocolate/Black
• Sandstone/Black

MINIMUM TEXT SIZE
Smallest character should be at least 1mm high.

MINIMUM ELEMENTS SIZE
Elements on leather emblems must be at least 0.3mm width.

OUTLINE
Outlines should be 3mm width.

BACKING
Low Melt - This backing us commonly used on wearables and applied with a heat press.
Pressure Sensitive - This sticker backing is commonly used on hard goods. Also, suggested option if patches will be sewn-on, in which we recommend a 3mm margin around the design.

LIMITATIONS
Low Melt: Since the product is applied with heat, it is not recommended for use on materials that may be heat sensitive (ex. some nylons, silk, some plastics, leather wool, fleece, etc.)
Pressure Sensitive: The use of these emblems on surfaces that may contain an oil finish, such as silicon, Teflon, rough fabrics, or outdoor goods is not recommended. 

ELECTRONIC PROOF
A digital sample via email is available in 24 hours. Edits are allowed.

PRODUCTION TIME
Samples time: 48 hours plus shipping.
Production time: 24 hrs. *
*Excludes Shipping. Some restrictions may apply.
Call 1-800-766-0448 for more information.

WASHING INFORMATION
Faux Leather Patches will withstand at least 52 domestic washing machine cycles at 104° F max.

SHELF LIFE
One year shelf life before applying (room temperature controlled environment).

APPLICATION INSTRUCTIONS - FAUX LEATHER (VEGAN)

PRESSURE-SENSITIVE
Make sure the application area is thoroughly cleaned. We recommend the use of rubbing alcohol. Remove paper backing and press firmly on the desired location.

LOW MELT HEAT SEAL ON GARMENTS - TOP HEAT

  1. Set the press at 315-325° F with 70-80 psi of pressure.
  2. Place the garment in the press. Make sure that the application location is wrinkle-free.
  3. Place the patch onto the desired location on the garment. Thermal tape is optional.
  4. Place a FlexStyle® silicone pad over the design.
  5. Press for 12-18 seconds
  6. Remove the garment from the press and allow to cool.

LOW MELT HEAT SEAL ON HATS - USING THE IQ 360 HAT HEAT PRESS

  1. Set the press at 245°-255° F for top heat and 315°- 320°F for bottom heat with 60-80 psi of pressure.
  2. Place the hat on the heat press, leaving out the inner layer of the cap. Use the adjustment lever for a better grip.
  3.  Place the patch on the desired location. To secure the patch and preventing it from moving, use Thermal Tape.
  4. Place a FlexStyle® silicone pad over the design.
  5. Press for 10-15 seconds.
  6. Deactivate the adjustment lever and remove the hat from the heat press.
  7. Remove the Thermal Tape once the patch has cooled.

DISCLAIMER: World Emblem recommends testing the best combination of heat seal parameters before application. World Emblem is not liable for any damages to garments during the application process.

NOTE: Please check out youtube.com/worldemblem for step by step instructions for applying our apparel decorations.

PRICES

Leather Patches
Leather Patches
Application: Leather Patches

 

Additional Information & Benefits

 

Leather patches can be heat sealed onto garments or applied to flat, non-textured surfaces with a pressure-sensitive backing. This simple addition can help your brand stand out from your competitors.

NOTE: Please check out the World Emblem YouTube Channel for step by step instructions for applying our apparel decorations.

For technical & application information please visit www.worldemblem.com/technical